LANGFANG WISDOM IMPORT & EXPORT CO., LTD.
LANGFANG WISDOM IMPORT & EXPORT CO., LTD
Add to Cart
Custom any sizes forging brass water tank level mechanical float floating ball valve
float valve (also balltap or ballcock ) is a mechanism or machine for filling water tanks,
such as those found in flush toilets, while avoiding overflow and (in the event of low water
pressure) backflow.
| Model | DN15BS |
| Port | 1/2" |
| Body | ABS |
| BALL | PE |
| PLUG | SILICON |
| DIAPHRAGM | EPDM |
| PRESSURE(Mpa) | 0-1.2 |
| Temperature (℃) | 0-70 |
| Flowrate (0.6Mpa) (L/MIN) | 45.2 |
| Used | Small pond water tank, water purifier, water dispenser |
Loose the screw on the arm to adjust the float position and achieve the horizontal and vertical installation.
Each of install method will not affect the performance.
1.If the body and pipe joint leak water, please check water tape is wrapped and the pipe joint is tighted.
2.The Strength should suitable when tight and fix the float valve, too much excessive strength will damage the valve.
3.Please check the water inlet filter regularly and remove the garbage out in time.
4.Please do not use the cleanser which will cause damage when clean the float valve.